FZJ100Link

The G4X FZJ100Link Plug-In ECU supports several options for fitting of a MAP sensor. Any one of the following options can be used:

1.Factory MAP Sensor – The factory MAP sensor is wired to An Volt 6.

2.MAP Sensor Wired Through AFM – To avoid running additional wires into the engine bay, a MAP signal can be brought in through either of the AFM signal wires. The AFM signal is wired to An Volt 4. Refer to factory wiring manuals for AFM wiring connections. Make sure the AFM can not be reconnected.

1.MAP Via Expansion Connector - The expansion connector provides power, ground, and analog channels for the connection of a MAP sensor.

Make sure that the correct MAP sensor input has been selected in PCLink and a MAP calibration has been performed before attempting to start the vehicle.