Any Analog Volt channel may be used for inputs from additional general purpose (GP) pressure sensors. The only restriction is that the sensor must have a 0-5V output. The sensor calibration (the voltages that correspond to given pressures/temperatures) must be known and this information must be entered into the ECU via PCLink.
GP Pressure Sensor Wiring:
·Signal – Analog Volt Channel
·Power – As per sensor manufacturers specification (can use ECUs +5V out if required)
·Ground – Ground to ECUs Sensor Ground.
CAUTION! |
Do not use a sensor designed to measure air pressure to measure fuel, oil or water pressures. Consult the sensor manufacturers specifications. |