CivicLink (98)

The G4X CivicLink (98) Plug-In ECU supports several options for fitting of a MAP sensor. Any one of the following options can be used:

1.Factory MAP Sensor – Models supported by the G4X CivicLink (98) Plug-In ECU are factory fitted with a MAP sensor. The factory MAP sensor is wired to An Volt 1.

2.MAP Through Expansion Connector - The expansion connector provides power, ground, and analog channels for the connection of a MAP sensor.

Make sure that the correct MAP sensor input has been selected in PCLink and a MAP calibration has been performed before attempting to start the vehicle.