350ZLink

The G4X 350ZLink Plug-In ECU supports several options for fitting of an IAT sensor. Either of the following options can be used:

1.Factory Fitted IAT Sensor – 350Z models are factory fitted with an IAT sensor in the MAF. This sensor is wired to An Temp 2.

2.IAT Through Expansion Connector - The expansion connector provides ground and a temperature channel for the connection of an IAT sensor. Note spare An Volt channels can be used as temperature inputs when a pullup resistor (to +5V) is added.

As the factory IAT sensor is not located in the intake manifold it is recommended to fit an aftermarket IAT sensor to the intake manifold and use the MAF IAT wiring or expansion connector to connect the sensor to the ECU.