S15Link and S13Link

The G4X S15Link and S13Link Plug-In ECUs are designed to be used on multi-coil and distributed ignition engines. The type of ignition used will need to be configured before the engine can be run. Do this by performing the following steps:

1.Connect a laptop/notebook PC to the ECU and connect to the ECU using PCLink.

2.Click on 'Ignition' in the configuration tree

3.Select 'Ignition Setup'.

4.Set the 'Ignition Mode' to 'Distributed' or 'Direct Spark'.

5.Perform a 'Store' by pressing F4.