The temperature of the fuel flowing through the ethanol content sensor. This reading is from an ethanol content sensor on a digital input.
This value is also set as the Fuel Temperature value when the Fuel Temperature input hasn't been setup.
The percentage of ethanol in the fuel. This reading is from an ethanol content sensor on a digital input.
Displays the blend current blend value from the Multi Fuel blend Ratio table which is used to blend the Charge cooling Coefficients, Injector Fuel Flow, Fuel Densities, Stoichiometric Ratios, Lambda targets and Warmup Enrichments.
This blend value is the perentage of the second fuel's table value that will be used, for example a value of 75% means the Lambda target will be 25% the value from AFR/Lambda Target table and 75% the value from AFR/Lambda Target table 2.