Triggers refers to the sensor(s) which are used for the ECU to calculate the current engine speed and position in the engine cycle.

 

Note: Because these parameters are so important to the operation of the fuel injection and ignition system, correctly setting up and calibrating the triggering is one of the most important steps in the entire installation and tuning process. Contact your nearest Link Dealer for assistance with these settings if you are al all unsure.

 

First the Triggering Setup parameters must be set and then the Trigger Calibration process must be performed.

 

For information on resolving issues with triggering, refer HERE.

For wiring information go to Trigger Inputs Wiring.