Refer here for Torque Management Boost Trim.
Shows the current status of the boost control system.
·OFF
·RPM Lockout (Boost control is off due to RPM too low)
·MAP Lockout (Boost control is off due to MAP too low)
·Open Loop (Boost control is operating in open loop mode)
·CL-Stage 2 Active (Proportional and derivative control is active)
·CL-Stage 3 Active (Proportional and integral control is active)
·Integral Clamp Active (The integral duty cycle is clamped and the boost pressure can not reach its target)
·Stage 1 (Pre-Spool) (The pre-spool duty cycle is applied to the wastegate solenoid)
The current Duty Cycle of the Boost Control PWM Output (The Auxiliary controlling the Wastegate Solenoid).
The Duty Cycle value from the currently active Wastegate %DC table, this is the Duty Cycle before the trims (ECT, IAT, GP, Gear) are added.
Displays which Wastegate DC (and Boost Target when using closed loop mode) Table/s are currently being used. This is part of the multiple boost tables functionality.
The boost pressure value that the Closed Loop Boost Control function is currently targeting.
This Runtime is only non-zero when using Closed Loop Boost Control.
Displays the amount of wastegate Duty Cycle trim currently being added by the proportional (feed forward) component of the Closed Loop Boost PID system.
This Runtime is only non-zero when using Closed Loop Boost Control.
Displays the amount of wastegate trim currently being added by the integral component of the Closed Loop Boost PID system.
This Runtime is only non-zero when using Closed Loop Boost Control.
Displays the amount of wastegate trim currently being added by the derivative component of the Closed Loop Boost PID system.
This Runtime is only non-zero when using Closed Loop Boost Control.
Displays the amount of trim being added to the wastegate Duty Cycle from the ECT (Engine Coolant Temperature) Wastegate Trim Table.
Displays the amount of trim being added to the wastegate Duty Cycle from the IAT (Intake Air Temperature) Wastegate Trim Table.
Displays the amount of trim being added to the wastegate Duty Cycle from the Gear Wastegate Trim Table.
Displays the amount of trim being added to the wastegate Duty Cycle from the GP (General Purpose) Wastegate Trim Table.