Ford TFI

DISCLAIMER

These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.

Configuration
	Engine Type	4 Stroke
	Cylinders/Rotors	Engine dependant
	Firing Order	Engine dependant
Ignition Setup
	Ignition Mode	Distributed
	Spark Edge	Rising (with Motorcraft module on distributor) Falling (everything else)
	Ignition Delay	Installer to set
Trigger Setup
	Trigger Mode	Ford TFI
Trigger 1
	Trigger 1 Type	Optical/Hall
	Trigger 1 Pull-up	On
	Trigger 1 Edge	All
Trigger 2 (NOT USED - Set to the below settings to ensure pin is held high by Pull-up).
	Trigger 2 Type	Optical/Hall
	Trigger 2 Pull-up	On
	Trigger 2 Edge	Falling

For more information or corrections to this information please contact tech support.