Note: This function is only available when using Single-Point Group or Multi-Point Group Injection Mode.

 

This setting determines how often the injectors are fired in relation to engine cycle.

 

For example:        On a four stroke engine, setting the injection rate per cycle to 1 will result in each injector activating every 720 degrees of crankshaft rotation. Offset of 360 between odd and even injectors.

         On a four stroke engine, setting the injection rate per cycle to 2 Engine Cycle will result in each injector activating every 360 degrees of crankshaft rotation. Offset of 180 between odd and even injectors.

         On a four stroke engine, setting the injection rate per cycle to 4 Engine Cycle will result in each injector activating every 180 degrees of crankshaft rotation. Offset of 90 between odd and even injectors.

         On a two stroke engine, setting the injection rate per cycle to 1 Engine Cycle will result in each injector activating every 360 degrees of crankshaft rotation.

         On a two stroke engine, setting the injection rate per cycle to 2 Engine Cycle will result in each injector activating every 180 degrees of crankshaft rotation.

         On a two stroke engine, setting the injection rate per cycle to 4 Engine Cycle will result in each injector activating every 90 degrees of crankshaft rotation.

 

Single-Point Group has more options (1,2,3,4,5,6,7,8,9,10,11,12) than Multi-Point Group (1, 2, 4)