DISCLAIMER

These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.

 

Configuration

Engine Type

Rotary

Cylinders/Rotors

2

Firing Order

1-2

Ignition Setup

Ignition Mode

Wasted Leading

Spark Edge

Falling (Dwell Edge = Rising)

Ignition Delay

Installer to set

Trigger Setup

Trigger Mode

Multi-tooth

Trigger 1

Trigger 1 Type

Reluctor

Trigger 1 Filtering

Level 1 (Low)

Multi-Tooth Posn

Crank

Tooth Count

12 note: actual tooth count is 24 but due to 2:1 dizzy drive reduction ratio crank speed number is 12.

Sync Tooth

1

Trigger 1 Arming Threshold

500

1000

2000

3000

4000

5000

6000

7000->

0.5

2

3

3.5

3.5

3.5

3.5

3.5

Trigger 2

Trigger 2 Type

Reluctor

Trigger 2 Filtering

Level 1 (Low)

Sync Mode

Crank

Trigger 2 Arming Threshold

500

1000

2000

3000

4000

5000

6000

7000->

0.5

2

3

3.5

3.5

3.5

3.5

3.5

 

Recommended Knock Filter (Bosch aftermarket sensor): 3.5kHz Narrow Band Filter

For more information or corrections to this information please contact tech support.