DISCLAIMER

These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.

 

Configuration

Engine Type

4 Stroke

Cylinders/Rotors

3

Firing Order

1 - 3 - 2

Ignition Setup

Ignition Mode

Direct Spark

Spark Edge

Falling (Dwell Edge = Rising)

Ignition Delay

Installer to measure

Trigger Setup

Trigger Mode

Suzuki K6A VVT

Trigger 1

Trigger 1 Type

Optical/Hall

Trigger 1 Pull-up

ON

Trigger 1 Edge

Falling

Trigger 2 (Wired to Bank 1 Inlet Cam Position Sensor)

Trigger 2 Type

Optical/Hall

Trigger 2 Pull-up

ON

Trigger 2 Edge

Falling

 

The information in the above table needs to be tested and confirmed. If you can confirm please contact Link Technical Support.

For more information or corrections to this information please contact tech support.