DISCLAIMER

These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.

 

Configuration

Engine Type

4 Stroke

Cylinders/Rotors

4

Firing Order

1-3-4-2

Ignition Setup

Ignition Mode

Depends on Vehicle

Spark Edge

Falling (Dwell Edge = Rising)

Ignition Delay

Installer to set

Trigger Setup

Trigger Mode

Multi-tooth

Trigger 1

Trigger 1 Type

Reluctor

Trigger 1 Filtering

Level 1 (Low)

Multi-Tooth Posn

Cam

Tooth Count

24

Sync Tooth

1

Trigger 1 Arming Threshold

500

1000

2000

3000

4000

5000

6000

7000->

0.5

2

3

3.5

3.5

3.5

3.5

3.5

Trigger 2

Trigger 2 Type

Reluctor

Trigger 2 Filtering

Level 1 (Low)

Sync Mode

Cam

Trigger 2 Arming Threshold

500

1000

2000

3000

4000

5000

6000

7000->

0.5

2

3

3.5

3.5

3.5

3.5

3.5

 

For the Gen1 to Gen3 motors (manifold over the rocker cover) it is common to have the center two cylinders running a little leaner and so often Individual Cylinder Fuel Trims are used to correct this.

 

Recommended Knock Filter (Bosch aftermarket sensor): 6kHz Narrow Band Filter.

 

For more information or corrections to this information please contact tech support.