DISCLAIMER

These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.

 

Configuration

Engine Type

4 Stroke

Cylinders/Rotors

10

Firing Order

1-6-5-10-2-7-3-8-4-9

Ignition Setup

Ignition Mode

Needs to be ran in Wasted Spark

Spark Edge

Ignition Delay

Installer to set

Trigger Setup

Trigger Mode

BMW S85 V10

Trigger 1

Trigger 1 Type

Reluctor

Trigger 1 Filtering

Level 1 (Low)

Trigger 1 Arming Threshold

500

1000

2000

3000

4000

5000

6000

7000->

 

 

 

 

 

 

 

 

Trigger 2 (Wired to Bank 1 Exhaust Cam Position Sensor)

Trigger 2 Type

Optical/Hall

Trigger 2 Pull-up

ON

Trigger 2 Edge

Falling

VVT Control

Cam Control System

BMW S85 V10

Frequency

250Hz

Cam Position Sensors

Pull-up Resistor

On

Active Edge

Falling



NOTES:

The S85 has 2 E-throttle bodies. Each cylinder has its own ignition coil. The VANOS system uses 4 solenoids for the whole system.

 

For more information or corrections to this information please contact tech support.