Honda K20 VTC

DISCLAIMER

These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.

Configuration
	Engine Type	4 Stroke
	Cylinders/Rotors	4
	Firing Order	1-3-4-2
Ignition Setup
	Ignition Mode	Direct Spark
	Spark Edge	Falling (Dwell Edge = Rising)
	Ignition Delay	Installer to measure
Trigger Setup
	Trigger Mode	Honda K20 VTC
Trigger 1
	Trigger 1 Type	Optical/Hall
	Trigger 1 Pull-up	ON
	Trigger 1 Edge	Rising
Trigger 2
	Trigger 2 Type	Optical/Hall
	Trigger 2 Pull-up	ON
	Trigger 2 Edge	Falling
VVT Control
	Cam Control System	Honda K20 VTC
	Frequency	300 Hz
Bank 1 Inlet Cam Position Sensor
	Pull-up Resistor	ON
	Active Edge	Rising

For more information or corrections to this information please contact tech support.