DISCLAIMER
These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.
Note: VVT Inlet Bank 2 cam sensor must be connected and setup for this trigger mode to work
Configuration |
||
4 Stroke |
||
6 |
||
1-2-3-4-5-6 |
||
Ignition Setup |
||
Direct Spark |
||
Falling (Dwell Edge = Rising) |
||
Installer to set |
||
Trigger Setup |
||
Nissan VQ35 |
||
Trigger 1 |
||
Optical/Hall |
||
Off |
||
Falling |
||
Trigger 2 |
||
Optical/Hall |
||
ON |
||
Falling |
||
VVT Control |
||
Nissan VQ35 |
||
250 Hz |
||
Cam Position Sensors |
||
ON |
||
Falling |
For more information or corrections to this information please contact tech support.