Nissan VQ35HR/VQ37

DISCLAIMER

These setting are provided as a general guide only. It is the installers/tuners responsibility to check and confirm that all of these settings are correct for the application.

Note: VVT Inlet Bank 2 cam sensor must be connected and setup for this trigger mode to work

Configuration
	Engine Type	4 Stroke
	Cylinders/Rotors	6
	Firing Order	1-2-3-4-5-6
Ignition Setup
	Ignition Mode	Direct Spark
	Spark Edge	Falling (Dwell Edge = Rising)
	Ignition Delay	Installer to set
Trigger Setup
	Trigger Mode	Nissan VQ35HR/VQ37
Trigger 1
	Trigger 1 Type	Optical/Hall
	Trigger 1 Pull-up	Off
	Trigger 1 Edge	Falling
Trigger 2
	Trigger 2 Type	Optical/Hall
	Trigger 2 Pull-up	ON
	Trigger 2 Edge	Falling
VVT Control
	Cam Control System	Nissan VQ35
	Frequency	250 Hz
Cam Position Sensors
	Pull-up Resistor	ON
	Active Edge	Falling

For more information or corrections to this information please contact tech support.